| MODEL |
|
INVEREX 500 |
INVEREX 1000 |
| CAPACITY |
VA/W |
500VA / 300W |
1000VA / 600W |
| INPUT |
Phase |
Single |
| Voltage |
110 / 120VAC or 220 / 230 / 240VAC |
| Voltage Range |
90 - 145VAC or 170-280VAC ( Narrow Range ) |
50-145VAC / 90-280VAC (Wide Range) |
| OUTPUT |
Phase |
Single |
| Voltage |
120VAC or 230VAC |
| Voltage Regulation(Batt. Mode) |
+10% ~ 18% |
| Frequency |
50Hz or 60Hz |
| Frequency Regulation (Batt. Mode) |
+/- 0.1 Hz |
| Output Waveform (Batt. Mode) |
Modified Sinewave |
| POWER FACTOR |
P.F. |
0.6 |
| BATTERY |
Charger Current |
8 Amp + / - 1Amp |
6 Amp + / - 1Amp |
| Floating Voltage |
13.7V + / - 0.2V |
27.4V + / - 0.4V |
| Overcharge Protection |
14.5V +/- 0.3V charger stops and fault |
29V +/- 0.6V charger stops and fault |
| TRANSFER TIME |
Typical |
8ms |
| EFFICIENCY |
AC to AC |
>95% |
| DC to AC |
>80% |
| INDICATOR |
AC Mode |
Green LED lighting |
| Battery Mode |
Yellow LED lighting |
| Battery Charging Mode |
Green LED flashing every 2 seconds |
| Overload |
Red LED flashing every 0.5 second |
| Fault |
Red LED lighting |
| AUDIBLE ALARM |
Low Battery at Battery Mode |
Sounding every 2 seconds |
| Overload |
Sounding every 0.5 second |
| Fault |
Continously sounding |
| PROTECTION |
Full Protection |
Deep Discharge, Overcharge, and Overload protection |
| PHYSICAL |
Dimension (DxWxH) mm |
224 X 255 X 80 |
| Net Weight (kgs) |
1.7 for 500VA / 300W |
| ENVIRONMENT |
Operating Environment |
0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing) |
| Noise Level |
Less than 45dB |
